Introduction :

The SL-WDLC-STD is a SmartLiving Door Latch Controller to control AC Powred Door Latch used for automatic door access control. It delivers greatly enhanced functionality as part of complete SmarLiving® automation system. This device offers one output channel to be connected to the door latch power supply and it has one input sensor channel that is used to connect to the door sensor that sense the state of door (Open or Close). Sensor along with output relay channel works in synergy to achieve automatic but secured door access control and status reporting mechanism. This controller is uniquely addressed, configurable, and controlled independently over SL-Bus Technology. It also has local pushbutton interface to open the door manually. This controller supports all the features exposed on SL-Bus, like grouping (zoning), invoking pre-set scenes (i.e. setup door open trigger as any of scene settings) for dynamic ambiance/mood creation which is the most demanding feature for architectural automation. It is designed to be installed easily on the standard wall sockets and compatible with your existing electrical wiring (100% retrofit). SL-WDLC-STD along with other companion SmartLiving devices offers state of art cutting edge technology through easy and user friendly UI for control and configuration on the smart devices

Features :

• One Relay Swtich Output Channel (Normally Opened) to control the Door Latch Operation and One Door Sensor Input Channel to sensor the state of Door (Opened or Closed)
• Basic Pushbutton Control to Open a Door, (Door will be automaticall closed after preprogrammed timeout)
• Wired and Wireless Connectivity for Control and Configuration, WiFi and Wired (SL-Bus communication protocol)
• WiFi Direct as well as Cloud Based Connectivty to Control from Anywhere
• Backlited indication for locating buttons in the dark
• Programmable Backlited LED intensity to suite your need
• Stylish, Innovative, Modular and Compact design
• Door Open event can be trigged by Advanced Zoning or Scene control needed for Automation curtomizatoin
• Short Circuit Protection through on device fuse implementation
• SmartSwitching@ZeroCrossing: This increses life of the load connected to the output chanel
• Two layer secutiry: Programmable 4-digit Door unlock password which is used to Open the door
• Works with Off-The Shelve available door latches
• Support IEEE802.11b/g/n Wi-Fi Standards
• Built-in Scheduler
• Automatic Firmware upgrade over the air

Technical Specification :

Power AC Input Universal Range 90-264VAC, 47-63 Hz/4Amp(Max)
Maximum Load Capacity 1000Watts/Channel, 4Amp Max Ohmic Current Load
Idle Power Consumption Less than 0.2W(Average)
Control Inputs Local Buttons/Channel Button-1 to Button-4, any or all used for Door Open operation
Control and Configuration WiFi and 2-Wire SL-Bus for advanced control & configuration
Environmental Operating Temperature -10°C…+70°C
Humidity 95% RH y, non‐condensing
Usage Indoor/Dry location use only
Mechanical Mounting/Fittings Snap fit type/ front side insertion into support frame
Dimension/Weight 42(W) x 42(H) x 50(D) (in mm)/ 120gm
Connector Type Screw Less Type, COLOR Coded
Connector Contacts LIVE, NEUTRAL, CH1, CH2, SL-BUS1, SL-BUS1
Safety Protection 4A Fast blowing fuse, Load Over current Protection
Approvals ISI, CE (in progress)

System Requirement :

• SL-BPS to power the SmartLiving-Bus (optional,if you are networking the devices over wired bus)
• Android smart device running Android2.3 or 4.0 or higher with Wi-Fi connectivity
• SmartLiving Configurator App to configure the device (downloadable from Play Store)
• SmartLiving User App to control the system (downloadable from Play Store)
• Other SmartLiving devices to form the complete system (Refer SL-SYS-APPNOTE.pdf)

Product Ordering Information :



Ordering P/N

For CONA Fittings







For GM Fittings





Package Contents :

• 1 SL-WDLC-STD device
• 2 Extra Fuses for replacement purpose