Introduction :

The SL-WIRB-STD is a SmartLiving IR (InfraRed Signals) Blaster to control Other home automation devices which operates with IR remote control. This device offers very good advantage to bring all such devices to the home automation control. It delivers greatly enhanced functionality as part of complete SmarLiving® automation system. This device offers IR emmitters packed togather to generate stronger beams to reach to the IR controlled devices in your room. This controller is uniquely addressed, configurable, and controlled independently over SL-Bus Technology. It also local pushbutton interface which are specifically used for device addressing purpose. The device has 4 blue LED, those creates typical patterns to indicate the taks is being done by the device. This controller supports all the features exposed on SL-Bus, like grouping (zoning), invoking pre-set scenes (i.e. Turining TV on by any of scene control) for dynamic ambiance/mood creation which is the most demanding feature for architectural automation, spceically single button press to invoke "Movie mode" that includes AV control as well as lights and curtains. It is designed to be installed easily on the standard wall sockets and compatible with your existing electrical wiring (100% retrofit). SL-WIRB-STD along with other companion SmartLiving devices offers state of art cutting edge technology through easy and user friendly UI for control and configuration on the smart devices

Features :

• One Universal IR Receiver for learning purpose and Seven IR Transmitter to Blast the IR code in 120 degree cone
• Basic Pushbuttons for addressing and network reset purpose
• Wired and Wireless Connectivity for Control and Configuration, WiFi and Wired (SL-Bus communication protocol)
• WiFi Direct as well as Cloud Based Connectivty to Control from Anywhere
• Backlited indication to indicate IR commands invocation status
• Programmable Backlited LED intensity to suite your need
• Stylish, Innovative, Modular and Compact design
• Universal, can learn and store upto 256 different remote key patters
• Can assign multiple IR codes (Max 8/button) sequence for one IR button control
• Programmable delay between multiple keys programmed to seamless multiple devices control
• IR Button press invocation as scene setting, this offers sofisticated control of IR devices from wall scene controller
• Works with all types of Off-The Shelve Home Electronics devices
• Support IEEE802.11b/g/n Wi-Fi Standards
• Built-in Scheduler
• Automatic Firmware upgrade over the air

Technical Specification :

Power AC Input Universal Range 90-264VAC, 47-63 Hz/4Amp(Max)
Input Inrush Current(<500us) 20 A max. (115 VAC) / 50 A max. (230 VAC)
Idle Power Consumption Less than 0.2W(Average)
Control Inputs Local Buttons/Channel Button-1 to Button-4, used for device addressing process
Control and Configuration WiFi and 2-Wire SL-Bus for advanced control & configuration
Environmental Operating Temperature -10°C…+70°C
Humidity 95% RH y, non‐condensing
Usage Indoor/Dry location use only
Mechanical Mounting/Fittings Snap fit type/ front side insertion into support frame
Dimension/Weight 42(W) x 42(H) x 50(D) (in mm)/ 120gm
Connector Type Screw Less Type, COLOR Coded
Connector Contacts LIVE, NEUTRAL, CH1, CH2, SL-BUS1, SL-BUS1
Safety Protection 4A Fast blowing fuse, Load Over current Protection
Approvals ISI, CE (in progress)

System Requirement :

• SL-BPS to power the SmartLiving-Bus (optional,if you are networking the devices over wired bus)
• Android smart device running Android2.3 or 4.0 or higher with Wi-Fi connectivity
• SmartLiving Configurator App to configure the device (downloadable from Play Store)
• SmartLiving User App to control the system (downloadable from Play Store)
• Other SmartLiving devices to form the complete system (Refer SL-SYS-APPNOTE.pdf)

Product Ordering Information :



Ordering P/N

For CONA Fittings







For GM Fittings





Package Contents :

• 1 SL-WIRB-STD device
• 2 Extra Fuses for replacement purpose