Introduction :

The SL-WC-SCN-SENOCC is a Wi-Fi communicator and Scene controller with Occupancy Sensor Inputs delivers greatly enhanced functionality as part of A complete SmarLiving® automation system. This device offers two distinct functionalities (a) Wi-Fi communicator works as independent gateway to communicate the information from proprietary SmartLiving-Bus over Wi-Fi network (b) Scene controller has four buttons that provides control on the wall. It is designed to be installed easily on the standard wall sockets. SL-WC-SCN-SENOCC along with other companion SmartLiving devices offers state of art cutting edge technology through easy and user friendly UI for control and configuration on the smart devices. As per customer's need, we came up with this prodcut derivative with Duel Occupancy Sensor Inputs (S1 & S2) to interface off-the-Shelves sensors available in the market. You can interace Relay output of Occupency sensor directly to this input, presence or vacancy will be sensed as the the state of input signal and accoringly pre-programmed action will be performed by the scene controller (for ex: Activate Scene-1 on the presence detection)

Features :

• Two Independent Channel integrated in one module
• Basic Control ON/OFF, Additional Dimming Control
• Wired and Wireless Connectivity for Control and Configuration, WiFi and Wired (SL-Bus communication protocol)
• WiFi Direct as well as Cloud Based Connectivty to Control from Anywhere
• Backlited indication for locating buttons in the dark • Programmable Backlited LED intensity to suite your need
• Advanced Zoning, Scene control supported for mood lighting
• Stylish, Innovative, Modular and Compact design
• Short Circuit Protection through on device fuse implementation
• SmartSwitching@ZeroCrossing: This increses life of the load connected to the switch • Programmable, Supports SmartLiving-Bus communication protocol
• Support IEEE802.11b/g/n Wi-Fi Standards
• Built-in Scheduler
• Automatic Firmware upgrade over the air
• Offers additioanl Cloud based communication to Control from Anywhere

Technical Specification :

Power AC Input Universal Range 90-264VAC, 47-63 Hz/4Amp(Max)
Input Inrush Current(<500us) 20 A max. (115 VAC) / 50 A max. (230 VAC)
Idle Power Consumption Less than 0.2W(Average),1W Max (Peak Power Consumption)
Control Inputs Local Buttons/Channel Button-1 to Button-4 for involink Programmed Scene controls manually
Control and Configuration WiFi and 2-Wire SL-Bus for advanced control & configuration
Environmental Operating Temperature -10°C…+70°C
Humidity 95% RH y, non‐condensing
Usage Indoor/Dry location use only
Mechanical Mounting/Fittings Snap fit type/ front side insertion into support frame
Dimension/Weight 42(W) x 42(H) x 50(D) (in mm)/ 120gm
Connector Type Screw Less Type, COLOR Coded
Connector Contacts LIVE, NEUTRAL, CH1, CH2, SL-BUS1, SL-BUS1
Safety Protection 4A Fast blowing fuse, Load Over current Protection
Approvals ISI, CE (in progress)

System Requirement :

• SL-BPS to power the SmartLiving-Bus (optional,if you are networking the devices over wired bus)
• Android smart device running Android2.3 or 4.0 or higher with Wi-Fi connectivity
• SmartLiving Configurator App to configure the device (downloadable from Play Store)
• SmartLiving User App to control the system (downloadable from Play Store)
• Other SmartLiving devices to form the complete system (Refer SL-SYS-APPNOTE.pdf)

Product Ordering Information :



Ordering P/N

For CONA Fittings







For GM Fittings





Package Contents :

• 1 SL-WC-SCN-SENOCC device
• 2 Extra Fuses for replacement purpose